INSPECTOR MODEL D4000
Dual Mode Portable Bar Code Verifier
INSPECTOR MODEL D4000 Data Sheet ........
|
The Model D4000 Provides the Two Most Popular Types of Verification;
ANSI Method and/or Point-and-Shoot Traditional Method
集合所有條碼檢驗器需求於一身的D4000 Bar Code Verifier，結合兩種 ANSI及LASER 掃瞄器，適用所有的標準檢驗法規。
ANSI Mode Operation
A D4000 incorporating an Auto-Optic scanner is the industry most flexible ANSI method verifier. Eight optical arrangements are possible via menu selections for four aperture sizes and two wavelengths of light. The optical geometry meets all requirements of the ANSI X3.182 Bar Code Quality Guideline.
Laser Mode Operation
A D4000 incorporating a laser scanner is an extremely easy to use point-and-shoot verifier. It requires virtually no user training and analyzes most of the essential traditional verification parameters. It also provides the ANSI method Decodability calculation and percent of decode information.
GENERAL SPECIFICATIONS - Model D4000 規格表
Modes of Operation ANSI 及 LASER條碼檢驗器
- ANSI Mode; all ANSI method parameters, application compliance, plus traditional analyses
- Laser Mode; traditional parameters (except reflectance), data comparison, percent decode
Symbologies D4000 之適用標準法規
Code 39; USS, w/mod43, AIAG B-1, B3/4/5/10, LOGMARS, HIBC
UPC/EAN including 2 and 5 digit supplemental codes
Code 128; USS, UCC/EAN 128 (see Unique ANSI and Laser Mode Features)
USS Codabar
Interleaved 2 of 5; USS, Case Code, w/ Mod 10 Check Digit
Features D4000 特色
Auto-discrimination between symbologies
Store and Print capability
Bi-directional scanning Multiple scan averaging |
|
User Interface 應用介面
- Simple 4 button: On, Print, Select, Enter 4-line LCD 5 LED - indicate average bar deviation (both modes)
- Audible tones indicate pass/fail results, low battery
Optional Accessories 選購配件
Printer: TP140A (印表機)
Battery charger (can be AC power supply w/batteries out of unit) (乾電池充電器)
ANSI Mode Features ANSI 條碼檢驗器特色
Auto-Optic Scanner: Two available models; 3, 5, 10, 20 mil or 3, 6, 10, 20 mil Two light wavelengths: 660 and 925 nm
UCC/EAN 128 Application Identifier (AI) data format check; AI 00 and 01 only
Laser Mode Features LASER條碼檢驗器特色
Percent of Decode displayed on lower two LCD lines (Continuous setting only) UCC/EAN 128 Application Identifier data format check; all AI per current specifications Store and print and/or database capability; 20K bytes non-volatile memory programmable in 5K byte segments |
D4000 應用範圍
| D4000 w/ Laser Optic |
- Bar codes on curved surfaces Bar codes on easily wrinkled or scratched surfaces Wet ink Codes that are short in height (<= ?quot;) UCC/EAN codes where AI and data formats must be analyzed Data match
- May use for analyzing symbols printed on a laser printer but must pay special attention to the ANSI decodability grade
|
| D4000 w/ Auto- Optic |
- Portable verifier for screening codes printed on thermal or laser printers Shipping codes direct marked on corrugated material (use 10 and 20 mil aperture depending on code type per UCC spec) Codes with Large (> 25-mil) X dimension Verify using IR light Printing codes with multiple sized X dimension Measure reflectance of material
- UPC codes on flat surfaces (use 6-mil optic)
|
| D4000 - Both Optics |
- General verification device for ISO 9000 companies Verify using IR light Data match Want common users to have ease of point and shoot but need QA personnel to have full ANSI Measure material reflectance
- Portable verifier for screening codes printed on thermal or laser printers
|
|
D4000結合兩種 ANSI 及 LASER條碼檢驗器 |
